Magnetic Pulser Devices
The closely calibrated frequency generator and high power drive circuitry are now built into the head of the wand on the Version 1 designs.
With the custom frequency generator circuitry incorporated inside this model, you do not need another separate driver device; this results in less cost for the user.
The MagPulse II is capable of producing two key frequencies, either 15 Hz or 326 Hz. These two frequencies are the frequencies researchers report to be most useful for relief of joint pain and stiffness, muscle pain, sciatica and back pain, as well as for reducing fluid retention, edema, swelling, and stiffness. They have also been helpful in a wide variety of other conditions.
The 15 Hz frequency stimulates Lymph circulation and drainage, reduces fluid retention, edema, and swelling. It has also been reported by several researchers to be effective in alleviating sinus pressure headaches, as well as possibly alleviating some allergic reactions.
The 326 Hz frequency is reported by researchers to normalize calcium metabolism, and is one of the major pain relieving frequencies. It also reportedly has some wide- spectrum antibacterial effects.
A three position switch on the back end of the head of the 2005 MagPulse II selects either of the two available frequencies, and also has a center OFF position. It can be powered by either an AC to DC wall adaptor, or by an accessory 12 volt ‘Car Cord'.
The newer 2005 model produces a 250% greater pulsed magnetic field intensity than the 2002 versions of the MagPulse wand produced at a given power supply level. Please note that virtually all of the anecdotal reports from researchers are of results received with only 40% of the magnetic field strength which this newer model can provide.
This device was designed to be extremely portable and ultimately simple to use. It can be used while riding in a car, or while relaxing with a book, listening to music, or watching TV, or even while doing desk work if you choose. (Please be attentive to traffic if you use it while you are driving!)
The MagPulse VI 2005 is is a six frequency version with a rotary switch frequency selector. It is built in a slightly larger diameter plastic housing to accomodate the added internal circuitry and larger control, but otherwise is similar to the MagPulse II in appearance and use.
On the latest MagPulse VI, Version 2 design variants, all of the frequency generating and selecting controls are built into a separate housing, making it easier for some researchers to select and change frequencies whilr the MagPulse Wand attachment / accessory is placed in a desired location out of easy reach. different sets of six calibrated frequencies are available on each of the variants. Custom units with your own set of six selected frequencies can also be built for your own specific research requirements. Inquire.
The face with the 4 LEDs embedded in it emits the same polarity of magnetic energy as does the North Geographic pole of our planet Earth. This is what most (but not all) magnetic researchers, including Dr. William Philpott refer to as "North Pole Magnetic Energy" or "Negative Magnetic Polarity Energy". This is the appropriate polarity to apply to the research subject's body for the vast majority of conditions. This face of the MagPulse II 2005 wand will attract the ‘north-seeking' end of a compass needle, and will push away another similar polarity strong North Pole Magnet.
As with any object or device which produces a magnetic field, the opposite end from where the North Pole Magnetic Field is emitted is the end which produces a primarily South Pole Magnetic Field (sometimes referred to as ‘positive magnetic energy.) Philpott and others only recommend the use of the South Pole magnetic energy in a few situations; refer to his MAGNETIC HEALING handbook for further information on this subject, or do an internet search on the subject. In most cases, it may be best to point the face of the MagPulse wand with the LEDs towards the area that the research subject chooses to treat, while avoiding exposure to the other end as much as possible.
The shape of the magnetic field is hard to illustrate or describe; it's far easier for you to do so if you obtain the $18.00 worth of parts from Radio Shack that are listed in the next section, so that you can literally LISTEN to the magnetic field which is being produced. The closer to the face of the MagPulse wands, the stronger the magnetic field, and conversely, the farther away from the MagPulse wand's face, the more the field strength is attenuated or reduced. So maximum magnetic field intensity is induced into a target area when the face of the MagPulse wand is as close as possible, or directly in contact with the skin.
Light also has dynamic healing properties and effects- that's why the high intensity LEDs are built into the core of these devices. While much is written and repeated about other colors, information from researchers in this field reveals the the 605nM, or TRUE ORANGE color of light is rthe specific color which the ‘Cytochrome A' or ‘Cytochrome oxidase' in the cells of our bodies most dynamically responds to; That's the color which has produced very dynamic results over the last several years, and is the one I use most, and recommend, and which I build into most of the MagPulse wands. (If you want a MagPulse wand built with another color built into the core, please consult the request & order page on the web site, or contact me.
It would follow, then that optimum results might be produced when the wand is used against bare skin, allowing the pulsed light to most easily penetrate . (Treatment of accu-puncture / accu-pressure points has also been reported to be a very useful approach; again, an internet search should offer a wealth of further information on this topic.)
These specially selected & prepared crystalline and crystalline metallic minerals and materials and special organic resins are used in building all MagPulse wands. After completing my specialized activation process, the MagPulse II 2005 Wand typically has a 16,000 ETP reading when not powered; it has a 19,700 ETP reading when on & pulsing energy through these core materials... These are very significant ETP reading levels! (ETP is an acronym for "Energy Transport Potential", and is an evaluation of a combination of Orgone and Tachion Energy flows generated by these charged / activated materials.
It may not be advisable to use pulsed magnetic devices if you are pregnant, if you are subject to seizures, if you have an implanted pacemaker or defribulator, or if you have a gallbladder condition . Consult with your Health Care Practitioner when in doubt. If they say it's OK for you to undergo an MRI scan, then it's probably OK to use the MagPulse wands, since the magnetic field strength which we are using in our research with these wands to produce results is but a small fraction of the power of the field you would be exposed to inside an MRI chamber during a scan.
I've personally used the various MagPulse Wands on my own head & neck many times for extended periods of time over the last 6 years, and can not report any symptoms or sensations of any adverse reaction, and have not experienced any signs of aggravation of my electro-sensitivity.
A 2.5 x 5.5 mm coaxial power jack, with the inside pin polarity +, is installed on the end of the handle, which allows for connection to your choice of alternate power supply. However, if you do decide to use a power supply other than that which is supplied with the MagPulse II 2005 Magnetic Pulser wand, be very sure that it's actual output does not exceed 24 VDC - don't believe the labels, which refer to an output when under the full rated load current... you really have to TEST with an accurate DC volt meter to be safe. If you do connect a supply with too high of a voltage, damage to the internal circuitry will very likely occur... and once you ‘let the smoke out', it'll need to be rebuilt. Also note that, in order to allow for maximum efficiency of operation of the internal circuitry from battery sources, there is no protection against reversed polarity built into this device; so if using anything other than the supplied power adaptor or ‘car cord', be very sure that the inner connector of the coaxial power plug you use is of POSITIVE (+) polarity.)
Also please note: it's normal for the MagPulse II wand's head to warm up during normal operation. Prolonged operation at close to 24 volts may result in the head of this wand becoming uncomfortably warm. If this occurs, it's time to turn it off and allow it to cool down. There may be more than adequate magnetic field strength when this device is powered by 12 to 15 VDC- I've used it this way about 90% of the time when testing it on myself over the last year. If the voltage is increased, the strength of the magnetic field produced is correspondingly increased. The Wall adaptor that I supply with the MagPulse II 2005 has been tested, and is supplying 17.55 volts to the device when it is running, or ‘under load'. This is proving itself to be a very adequate power supply level, without generating excessive warming of the MagPulse II's wand head.
"{d} Licensed practitioners, including physicians, dentists, and optometrists, who manufacture or otherwise alter devices solely for use in their practice."
"{f} Persons who manufacture, prepare, propagate, compound, or process devices solely for use in research, teaching, or analysis, and do not introduce such devices into commercial distribution."
It is in the spirit of the above 'exemptions from regulation' that the circuit diagrams, projects, kits, and experimental devices offered here for research purposes can be made available to everyone on a private individual agreement basis, for use in their own research, allowing each of us the opportunity to take charge of our own well-being! This, combined with the First Ammendment protection of our rights of access to information (freedom of speech), are the basis for the availability of the research information you will find here.
